Color Masking Tape Jumbo Roll
 | Color Masking Tape Jumbo Roll
Contact Us |
High Heat Tape Company manufactures color masking tape jumbo roll for tape converters, slitting workshops, OEM log roll supply, and export converting orders. This colored crepe paper log roll is made as semi-finished material for further slitting and rewinding, with attention to usable jumbo width, 1500m-3000m roll length options, adhesive coating stability, color batch consistency, and finished roll yield after conversion. It is suitable for production teams that need stable colored masking tape material for private specifications and repeat export supply.
Product Photos
Product Overview
A color masking tape jumbo roll is supplied as a wide log roll before it is slit into finished widths. For converting factories, this format is more practical than purchasing ready-made rolls because it allows each workshop to control finished width, roll length, label style, and market-specific color range. Regular jumbo roll widths include 990mm, 1240mm, 1250mm, and 1280mm, while common roll lengths include 1500m, 1800m, 2000m, and 3000m.
The material uses colored crepe paper backing with a rubber based adhesive layer. During production, roll hardness, core alignment, edge trim, and usable width are checked because small issues in the mother roll can become repeated problems after slitting. A soft roll may create uneven sides after rewinding, while poor edge trim can increase fiber dust and waste during conversion.
For OEM color programs, the custom color masking tape jumbo roll can be produced in cream, yellow, red, blue, green, black, and approved custom shades. Color shade approval before bulk coating is recommended when the same color will be reordered across different export batches. A retained color sample, batch label, and production record make it easier for converters to keep one color family consistent over repeat supply.
Adhesive coating consistency is also important for practical converting work. A stable coating helps reduce dry bands, heavy glue edges, adhesive transfer, and knife glue build-up. During sample converting, typical checks include unwind smoothness, slit edge fiber dust, glue transfer, roll side appearance, and 24-hour finished roll condition.
Technical Data Sheet
Item | Typical Value |
Product Type | Semi-finished colored crepe paper masking tape jumbo roll |
Backing Material | Colored crepe paper backing |
Adhesive System | Rubber adhesive or natural rubber adhesive |
Total Thickness | 130um-160um, 145um and 150um common references |
Jumbo Roll Width | 990mm, 1240mm, 1250mm, 1280mm or custom usable width |
Roll Length | 1500m, 1800m, 2000m, 3000m |
Color Options | Cream, yellow, red, blue, green, black, custom approved color |
Slitting Tolerance | Typical +/-0.5mm after sample slitting confirmation |
Adhesion To Steel | Reference 6-9 N/25mm, depending on adhesive grade |
Tensile Strength | Reference 65-85 N/25mm |
Elongation | Reference 7%-14% |
Holding Power | Reference 3h-24h, depending on test condition |
Temperature Reference | 60C-100C short exposure grade options |
Unwind Force | Controlled for stable slitting and rewinding |
Coating Stability Check | No obvious dry band, heavy glue edge, or adhesive transfer |
Slitting Quality Check | Edge trim, slit edge fiber dust, knife glue build-up observation |
Roll Structure Check | Core alignment, roll hardness, telescoping observation |
Export Roll Handling Check | Roll edge protection, moisture-resistant wrapping, pallet stability, batch label |
Benefits
- Supplied as semi-finished jumbo roll masking tape for slitting, rewinding, and OEM conversion.
- 990mm-1280mm jumbo width options support different finished roll layouts and edge trim planning.
- 1500m-3000m roll lengths help reduce roll changes during continuous converting.
- Typical +/-0.5mm slitting tolerance supports cleaner finished roll width control after sample confirmation.
- 130um-160um total thickness range gives converters options for general masking and stronger handling grades.
- Controlled adhesive coating helps reduce dry bands, heavy glue edges, knife glue build-up, and adhesive transfer.
- Color shade approval and batch label tracking support repeat OEM color programs.
- Core alignment and roll hardness checks help reduce telescoping, soft roll sides, and storage deformation.
Application
- Tape converting factories producing colored masking tape finished rolls.
- Slitting and rewinding workshops using wide log rolls as input material.
- OEM masking tape log roll programs for private color, width, and length specifications.
- Automotive painting masking tape conversion where color coding is required.
- Industrial surface masking products for spraying, painting, and temporary protection.
- Multi-color product lines that require color shade approval before mass production.
- Export converting orders needing batch tracking and protected jumbo roll supply.
- Wholesale customized tapes for distributors with their own finished roll formats.
What Should Be Confirmed Before Slitting A Color Masking Tape Jumbo Roll?
Before a color masking tape jumbo roll enters a slitting and rewinding line, the converter should confirm usable jumbo width, roll length, paper core condition, coating side direction, and target finished width plan. A 990mm, 1240mm, 1250mm, or 1280mm roll may require different edge trim and finished roll layouts, while 1500m-3000m lengths affect roll change frequency. A stable crepe paper backing helps the web move through the machine without unnecessary tearing, while even adhesive coating helps reduce knife build-up, edge lifting, and dirty slit sides after slitting.
How Does Jumbo Roll Quality Affect OEM Converting And Export Orders?
Jumbo roll quality has a direct effect on finished roll yield, converter downtime, and repeat order consistency. If the adhesive coating is too heavy near the edge, the slitting knife may collect glue and leave uneven roll sides. If rewinding tension is too loose, finished rolls may become soft or telescoped; if it is too tight, the crepe paper backing may wrinkle or deform. For OEM orders, color batch consistency should be checked with a retained color sample, batch label, and production record before mass supply. Export rolls should also be checked for protected edges, moisture-resistant wrapping, pallet stability, and clear roll identification so the receiving workshop can match each jumbo roll with the correct slitting plan.
FAQ
Is this product a finished retail masking tape roll?
No. It is supplied as a jumbo roll or log roll for converters, slitting factories, and OEM finished roll production.
Can the jumbo roll color be customized?
Yes. Custom colors can be produced after color shade approval. A retained color sample is recommended for repeat orders.
What width and length are commonly supplied?
Common jumbo widths include 990mm, 1240mm, 1250mm, and 1280mm. Roll lengths can include 1500m, 1800m, 2000m, and 3000m.
What should be tested before bulk converting?
Converters should test unwind smoothness, slitting tolerance, edge dust, adhesive transfer, color consistency, roll hardness, and sample finished roll appearance.